MM15MB

Technical specifications
Light output / runtime
Mode 1 : 3 lumens / 31days
Mode 2: 22 lumens / 8days
Mode 3: 255 lumens / 31 hrs
Mode 4: 1200 lumens / 6.8hrs
Mode 5: 2625 lumens / 2.8 hrs
Turbo: 6800 lumens / 2.6 hrs
Max beam distance: 303 meters
Peak beam intensity: Lux: 23.000
Waterproof: To IPX-8 standard
Impact resistance: 1.5M
Above data was tested base on ANSI-FL1 standard
Batteries: four 18650 rechargeable batteries(not include)
Dimensions: 114mm(length) x 64mm(head diameter)
Weight: 333G (without battery)

DETAILS

Utilizes two U.S. made Cree XHP70 LED chip 

Maximum output up to 6800 ANSI lumens

Highly efficient circuit design offers maximum output and runtime

Multi-function clicky side switch with momentary activation and on/off

Memory function to remember last output setting used (except hidden modes)

Advanced thermal protection circuit prevents overheating

Light orange peel reflector creates great throw distance and beam pattern

Aircraft grade aluminum, mil-spec hard anodized for maximum wear

Toughened ultra-clear tempered glass lens with anti-reflective coating

Large copper heat sink pad for superior thermal conductivity

LED indicator turns red to alert user to switch lower output mode and recharge batteries in time

 

Technical specifications

Light output / runtime

Mode 1 : 3 lumens / 31days

Mode 2:  22 lumens / 8days

Mode 3: 255 lumens / 31 hrs

Mode 4: 1200 lumens / 6.8hrs

Mode 5: 2625 lumens / 2.8 hrs

Turbo: 6800 lumens / 2.6 hrs

Max beam distance: 303 meters

Peak beam intensity: Lux: 23.000

Waterproof: To IPX-8 standard

Impact resistance: 1.5M

Above data was tested base on ANSI-FL1 standard

Batteries: four 18650 rechargeable batteries(not include)

Dimensions: 114mm(length) x 64mm(head diameter)

Weight: 333G (without battery)

 

Included accessories

Lanyard

Holster

Handle

Spare o-rings

 

User Interface

Turn the light ON/OFF by the side switch. Once you release the switch, the light

comes on constant output mode.

Presshold the switch from ON to cycle through all the modes: Mode 1 > Mode 2 >

Mode 3 > Mode 4 > Mode 5. Release the switch to select the desired output with

mode memory.

Double-click from ON to access Turbo. Double-click again for strobe. 

Double-click again for strobe. Another double-click for SOS. 

Another double-click for beacon. Single click gets you back to regular mode.

Note there is no mode memory for hidden modes.

Turbo mode steps down to mode 5 when thermal protection kick in

to prevent overheating.

When in standby, press-hold the switch for momentary activation (6800 lumens)

Double press and hold the switch for constant 6800 lumens. (Second press-hold within 1.5s)

Double-click for instant strobe.

Lock-out mode is accessed by a rapid triple-click of the switch from OFF. 

The two XHP70 emitters will flash twice to indicate the lock-out is engaged

Another triple-click re-activates.

Standby indicator flashes when batteries are connected but the light is not on. 

A brief green flash of the switch occurs every three seconds.

 

Please use high drained quality batteries

Pleas do NOT this light unattened


Warning
Please caution when using higher output levels. Light body gets hot when the light is on for long period of time and avoid shinning the beam directly into the eyes. This product is high power device and capable of causing eye damage.

Specifications are subject to change without prior notice. Please always refer to our official site for the latest information.

Product Inquiry

To obtain more information regarding Niwalker 's products, please complete the form below and your local sales representative will be in touch with you shortly.

NEW PRODUCTS