MM20EB

Technical specifications
Light output / runtime
Mode 1 : 20 lumens / 120hrs
Mode 2 : 70 lumens /35hrs
Mode 3 :400 lumens /10hrs
Mode 4 :1300 lumens /6.8hrs
Mode 5 :3500 lumens / 1.5hrs
Max beam distance: 690 meters
Peak beam intensity: Lux: 120000
Waterproof: To IPX-8 standard
Impact resistance: 1.5M
Total length: 153.39mm / Light body diameter: 49.26mm / Light head diameter:64mm
Weight :410G (without battery)

DETAILS

Utilizes 3 U.S. made Cree XPL-HI LED chip. 

Maximum output up to 3500 lumens.

Working voltage 7.9V~12.6V.

Smooth polished reflector creates maximum throw.

Aircraft grade aluminum, mil-spec hard anodized for maximum wear.

Toughened ultra-clear tempered glass lens with anti-reflective coating.

Large cooper heat sink pad for superior thermal conductivity.

High efficient circuit design offers longest possible runtime

Intelligen circuit to prevent possible damage from overhearting also for safety purposes

Uses Three 18650 batteries for extended period runtime  .

Low voltage warning to alert user to recharge batteries in time.

 

Technical specifications

Light output / runtime 

Mode 1 : 20 lumens / 120hrs 

Mode 2 : 70 lumens /35hrs 

Mode 3 :400 lumens /10hrs 

Mode 4 :1300 lumens /6.8hrs 

Mode 5 :3500 lumens / 1.5hrs 

Max beam distance: 690 meters

Peak beam intensity: Lux: 120000

Waterproof: To IPX-8 standard

Impact resistance: 1.5M

Total length: 153.39mm / Light body diameter: 49.26mm / Light head diameter:64mm

Weight :410G (without battery)

 

User Interface

Turn the light  ON/OFF by the side switch. Once you release the switch,

the light comes on constant mode.

When the light is on, single click the switch within one second to cycle

through all the modes, mode memory remembers the last mode used.

When in stand by(light off), press-hold the switch for momentary max output.

When in stand by, double click the switch for instant strobe. 

Double click from on to access the hidden modes. Double click for SOS. 

another double click-for beacon mode Single click the switch gets you

back to off.

Note there is no mode memory for hidden modes

Lock-out mode is accessed by twisting the light body. 

Mode 5 (max output) steps down to mode 4 when thermal protection kick 

in to prevent over heating. 


Warning
Please caution when using higher output levels. Light body gets hot when the light is on for long period of time and avoid shinning the beam directly into the eyes. This product is high power device and capable of causing eye damage.

Specifications are subject to change without prior notice. Please always refer to our official site for the latest information.

Product Inquiry

To obtain more information regarding Niwalker 's products, please complete the form below and your local sales representative will be in touch with you shortly.

NEW PRODUCTS